Embedded Wireless Solutions Support Center

Support Center > Bluetooth > BT830

Bluetooth Profiles

Last Updated: Jan 31, 2014 11:25AM EST

Bluetooth profiles indicate the general functionality or minimum requirements that a Bluetooth-enabled device must support in order to communicae with another Bluetooth device in a specific user scenario. A Bluetooth profile must contain at least the following information:

  • Any dependencies on other profiles
  • Suggested user interface formats
  • Specific parts of the Bluetooth protocol stack that are used by the profile.

Profiles make Bluetooth devices compatible enough to be able to connect with each other.

There are two types of Bluetooth profiles:

  • Conforming - Define core requirements for a Bluetooth device and are available by default.
  • Interoperability - Define minimum requirements for a Bluetooth device to support a specific application. These profiles are based upon conforming profiles.

The following is a list of Bluetooth profiles.

Conforming Profiles 


Generic Access Profile
The basis for all other profiles; it defines the generic requirements for detecting and establishing a Bluetooth connection.


Generic Object Exchange Profile
Defines protocols and procedures for support of Object Exchange Protocol (OBEX) usage models.


Serial Port Profile
Defines procedures required for configuring serial cable connections between peer Bluetooth devices using the RFCOMM protocol.

Interoperability Profiles 


Advanced Audio Distribution Profile
Defines how high quality audio can be streamed from a media source or SRC (such as an MP3 player) to a sink or SNK (such as a headset or car radio).


Audio/Video Remote Control Profile
Provides a standard interface to control all user-accessible A/V devices (such as TVs and stereo audio equipment) using a single remote control (or other device). Can be used with A2DP.


Hands-Free Profile
Defines how a mobile device (such as a cell phone) can be used in conjunction with a hands-free device over a Bluetooth link; allows the hands-free device to function as an audio input/output device for the mobile device. Depends on SPP.


Human Interface Device Profile
Defines protocols and procedures to support human interface devices such as a mouse, keyboard, pointing and gaming devices, and remote monitoring devices. Designed to provide a low latency link with low power requirements.


Headset Profile
Defines protocols and procedures to support interoperability between a mobile device (such as a cell phone) and a headset. The headset uses AT commands to control the mobile device. Depends on SPP.


Object Push Profile
Defines the roles of a push server and push client; defines protocols and procedures for sending small data objects (such as virtual business cards or appointment details) between Bluetooth devices.

Note: It is referred to as 'push' because the transfers are always initiated by the sender (client) rather than the receiver (server).

Depends on GEOP.


Personal Area Networking Profile
Defines the necessary protocols and procedures that allow two or more Bluetooth devices to form an ad-hoc network or a remote network through a network access point. 
Intended to allow the use of Bluetooth Network Encapsulation Protocol on Layer 3 protocols for transmission over a Bluetooth link. 

Where to Buy

Click the link below to find out where to buy Laird's wireless modules in your region.

Buy Now

Software Login

Some links in this support site require access to Laird's software centers.

Bluetooth Firmware Center


Need BT/BLE Stack for Embedded Cortex M3/M4 and BT800/BT830?

Visit Laird's partner Searan to learn more about DotStack, a highly efficient, ultra small stack that is fully compatible with the BT800/BT830.

More at Searan.com

Contact Us

  • Email Us
  • Call Us:
  • Americas: 1-800-492-2320 Option 2
  • Europe: +44-1628-858-940
  • Hong Kong: +852-2923-0610
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
Invalid characters found